Tag: building performance

  • HPH319 : Natural materials and healthy homes – with Tom Woolley

    HPH319 : Natural materials and healthy homes – with Tom Woolley

    Architect, educator and builder, Tom Woolley, takes us through some of the natural construction materials we should be using to build healthier homes.

    Interview with Tom Woolley

    Tom is a returning guest to the podcast, with hempcrete being the subject of his previous interview.

    Now, he has a new book: Natural Building Techniques – A Guide to Ecological Methods and Materials, and it is topics within that which we have been discussing with him. His book includes sections about renovating and retrofitting, information about suppliers, and different kinds of natural materials that are available. It also looks at some recent case studies, talks about how to tackle projects, and what some of the obstacles might be that you could come up against.

    The supply chain of natural materials is becoming far more robust

    Tom explains that for a long time people have been given excuses about why natural materials are too expensive or don’t work, which has acted as a barrier to their take-up.

    However, in recent years, a lot of work has been done to make the supply chains more robust, with greater availability and, in some cases, cheaper pricing. This in turn has encouraged more people to try them.

    Tom also believes that new fire and thermal performance regulations will make it harder for plastic and synthetic insulation companies to fabricate results, and composite materials like hempcrete will be shown to be just as good.

    The term that is generally used for natural materials is bio-based materials, which covers anything from timber and straw, to hemp, sheep’s wool, and other natural fibres. Closely linked are also things like earth and lime.

    We need to stop using timber carelessly

    When it comes to the sustainability of using natural products, Tom addresses the current problems with timber.

    “There’s enormous amount of wastage of timber really. Timber is used in many situations, where it probably isn’t needed to the extent that it is, but people just chuck it in as though it’s a cheap material, which it no longer is.”

    He also says that there is a lot of misinformation around the flammability of cross-laminated or mass timber construction, which has resulted in people returning to use concrete.

    We do though need to be careful and responsible in our use of timber, and Tom explains that there are companies in the UK that are constructing using locally harvested roundwood poles, which is a great way of using timber more responsibly and economically.

    Tom also suggests that there are many more resources that remain untapped, for example the biomass waste from palm oil trees could be used for bio-based composite products.

    Lime and clay can be great alternatives to cement

    Tom has been working with lime for a number of years and says that it is a natural biocide which is very good for healthy buildings. It does however still use energy to produce it, so he is now experimenting with a clay powder that seems to work almost the same as the lime, and which would save a great amount of embodied energy.

    Stone and earth are two of the oldest forms of building material

    Stone is a natural material that can be re-used and Tom is horrified when he sees sites being bulldozed and the stone being buried, when there are far greater benefits with the many other ways it could be used.

    While cob and rammed earth have plenty of advocates, using these materials alone it can be hard to reach modern standards of energy efficiency. However, they are hygroscopic and have health-giving properties that make them a very good material to use.

    Tom is a great believer in hybrid construction these days, and building with timber, sheep wool, earth, hemp and all sorts of other things, depending on what’s available and how they can be combined together.

    Straw can be tricky if you don’t know what you’re doing!

    Tom admits that he’s not the biggest fan of using straw as a construction material, largely because he’s seen so many straw bale disasters!

    People often think because straw bales are relatively inexpensive, then it must be cheap to build a straw bale house and anyone can do it. However, there are a number of pitfalls, such as when you have a roof resting on the walls you need to factor in that bales are going to move, their suitability in very wet conditions, and having to be extremely well rendered and plastered to make them safe from fire.

    He has however seen some wonderful examples, particularly when the straw bales are used as infill within a timber frame, rather than being load-bearing.

    If you are looking to build with straw, Tom recommends getting experience first on another project so that you know what’s involved, and preferably attend a training course run by experts.

    Hempcrete is an excellent material for managing moisture in a building

    This would always be Tom’s preferred method of building, used as 300-350mm walls within a timber frame construction. It has an impressive thermal performance and also creates a very healthy environment because of its hygroscopic properties.

    Over the last year, they have had a study done by the University of Ulster on one of their hempcrete buildings. Despite temperature and humidity levels varying greatly throughout that time, the relative humidity stayed exactly the same.

    It is also very versatile in its application. It can be mixed in a mixer and cast in shuttering, it can be sprayed into a building, and it can also come in block form.

    Hemp is readily available for use in construction, with more growers jumping on the bandwagon of bio-based materials for company carbon off-setting. It is a useful crop for farmers because it’s used in the annual rotational cycle between cereal crops such as barley and wheat. The fibre is stripped from the hemp and this in itself becomes extremely valuable. The hemp fibre can be used in a variety of insulation products or composites, including car interiors and replacing plastic in aeroplanes.

    Emphasising eco-credentials can make mortgaging more challenging

    Tom thinks that sometimes approaching insurers, mortgage providers, planners, and building control professing your wacky eco house ideas can be detrimental!

    He suggests that by being more tactical and not making a song or dance about it, you’re less likely to have a problem. He gives the example of a small company in Wales who have just sold a trial hempcrete house, which got a mortgage from Nationwide Building Society without them batting an eyelid.

    “It’s no good just saying, Let’s insulate it”

    With his book, Tom is keen to educate even some of the green movement who emphasise the importance of insulating all the buildings in Britain, while effectively promoting the use of petrochemical insulation materials.

    “There must be lots of white van men out there just happy to come and stick any sort of plastic rubbish into buildings. That is not good enough. We have to get people to use the right materials and the right techniques that aren’t going to damage the planet and aren’t going to damage people’s health.”

    He accepts that there will always be some things that can’t really be made out of anything other than plastic, and if they’re used in a sparing and limited way then that’s something that shouldn’t be condemned. However, he takes issue with some of the Passivhaus organisations for promoting materials that are plastic and synthetic oil based, which they are claiming will help to save the planet by reducing energy. When 50% of the plastic waste going into the oceans is from the construction industry, Tom questions why they need to be wrapping buildings in plastic membranes, when we can build airtight buildings with hempcrete that are fully breathable and aren’t wrapped in plastic.

    Active House provides an alternative to Passivhaus

    Tom sees Active House as having a more holistic and sensible approach to these issues, particularly around the design and configuration of buildings, use of daylight, passive solar etc. The Active House Alliance has recently been set up in the UK and certification will be offered in the future.

    We don’t have enough building performance data

    Tom is keen to see far greater investment in building/material performance data, but says that while organisations such as Innovate UK have thrown money at petrochemical solutions, they haven’t been as supportive of natural and bio-based approaches.

    There are however some very good centres of research that are being set up, such as at the University of Suffolk. Tom has also been in discussion with Cardiff University about doing some testing on further hempcrete houses that are being built in Wales.

    “We know that they work, but it’s no good having the anecdotal information that we know that they work really well, and even better than synthetic materials. We need to have the hard facts, we need to have the data. And we also need to have more standards.”

    Research in the UK and around the world shows that issues around mould are another big challenge that needs to be faced, even for properties that have been renovated. But there are now many in the medical community that are recognising the environmental causes of health problems, such as VOCs, formaldehyde etc. Tom sees natural materials as being the solution to get out of these problems, and this is likely to be one of the main directions of his work in the coming years.

    Find out more

    Visit the website of Rachel Bevan Architects

    Find out more about Natural Building Techniques: A Guide to Ecological Methods and Materials

    Transcript

    Please connect with us

    Subscribe, rate and review us on Apple Podcasts

    Like our Facebook page

    Follow Ben Adam-Smith on Bluesky

  • HPH308 : Testing the thermal performance of a house – with Tom Fenton from Veritherm

    HPH308 : Testing the thermal performance of a house – with Tom Fenton from Veritherm

    Tom Fenton from Veritherm explains how to test the thermal performance of a home, what this data can reveal and how it can then be used.

    Interview with Tom Fenton

    Tom Fenton began his career working in the family’s design consultancy that focused on the envelopes and facades of commercial and industrial buildings. From this unique vantage point they were able to see the pitfalls in the design and construction process that impact on the performance of the building fabric, which led them to develop Veritherm’s test of thermal performance.

    Thermal performance measurement should be affordable and scalable

    In general, the construction industry’s understanding of thermal performance has been based on theoretical design assumptions and desktop modelling. Academic approaches to measuring thermal performance are lengthy, costly and complex, and only really used at a research level. Veritherm’s aim was to develop a solution that would be simple to use while being affordable and quick enough that it could be implemented at scale into a range of projects.

    Heat will find the weakest point

    Even in properties with high-performing materials and quality specifications like a Passivhaus, if the build quality or detailing isn’t quite right, then it will be sub-standard compared to its design predictions. Heat is like water and will always find the weakest point, which is where the energy will be lost.

    A phased testing approach can be beneficial

    The assumption is generally that testing would be carried out on completion of a new build home, but Tom says that actually, the retrofit market is accounting for around half of their business. Using a phased approach, an initial test will give a baseline measurement of the existing home and how it is performing. That information can be fed back to the design team to consider the most suitable fabric upgrades for the property, rather than relying on design assumptions. Further testing can then be used at other stages as new elements are introduced, to quantify the difference that eg, replacement windows or external wall insulation have made. A final test can determine whether the project goals have been achieved.

    A phased approach can also be useful on a new build, with measurements being taken before linings are installed. Together with further diagnostics, this can help to identify the possibility of any errors in the external envelope and allow them to be rectified before being sealed up.

    There are three phases to a Veritherm test

    The Veritherm test is carried out overnight and is broken down into three stages.

    The first step is to retrieve relevant design information for the property, such as its thermal specification and basic dimensional information, which is entered onto the Veritherm dashboard.

    Also in this preparation stage, the equipment is deployed in the property which includes temperature sensors in each of the habitable rooms, along with fans and heaters.

    During the measurement stage, the Veritherm platform activates the equipment remotely and a controlled and measured heat load is applied to the property, using the fans to ensure temperatures are rising uniformly throughout. It is heated for the first half of the night before then being left to cool passively for the remainder of the time. All of the heat load and temperature data is sent throughout the night to the cloud-based software platform, which uses its integrated algorithms to generate the results.

    On completion of the test the following morning the results are instantly available in a full report. This quantifies the rate of energy loss from a building per degree of temperature difference, expressed in units of watts per kelvin. The report also breaks down the data from the individual temperature loggers to give a better understanding of what is happening, and where, in the building.

    A Veritherm test is quite often carried out alongside other diagnostic tools, such as an airtightness test, so that you can understand what losses are attributable to air infiltration through gaps, and what losses are attributable to the fabric.

    Thermal imaging can pinpoint problems

    Veritherm’s test quantifies the rate of heat transfer, giving the average U-value for the building as a whole. However, if the test flags up any areas of concern, further diagnostics such as thermal imaging could be carried out to pinpoint anomalies.

    The performance gap can be quantified

    The Veritherm report compares the ‘measured’ data from the test, with the ‘designed’ data that was entered into the system in the preparation stage. This gives you a quantification of what that difference is between the designed and as-built performance, ie the performance gap. That information can for example be fed back to the architect to help them improve their design processes. If there’s a 400% gap in performance it might mean that the self-builder needs to look at considerably improving their envelope, but if it’s only 5% then that’s not going to make a significant difference on their fuel bills post-completion.

    The data that is produced can also be fed back into energy modelling software to communicate to clients what the longer-term impact will be on emissions and heating demand. This is particularly useful when it comes to designing heating systems to be correctly sized for the property. A new build property that doesn’t perform to its designed intent, means that the heating system may not be suitable or efficient. And conversely, many existing buildings have heating systems that are oversized in order to compensate for the unknown, which means there are many capital and operational savings to be had by getting it right and installing the correct system based on the particular property’s requirements.

    Also in the Veritherm report is a thermal efficiency rating, which is where the rate of energy loss is divided by the usable floor area. Using this traffic light style rating means you can compare for example a 5 bedroom house with a 1 bedroom bungalow, and identify where your property sits on that scale.

    The ‘designed’ and ‘measured’ data almost never tally!

    With the experience of carrying out these tests comes the knowledge that there is nearly always a difference between the designed and measured values. In general, new builds will tend to underperform against their designs. Existing buildings that use EPCs or reduced data standard assessment procedure (rdSAP) will pluck thermal values from standardised tables based on the building’s construction type and year of construction, to come up with basic thermal specifications for that property. Once measured, these properties will often outperform what was expected of them and the client can actually have a cost-saving on their planned improvement works. With upgrades being rolled out to millions of homes across the UK, Tom says that there is serious value and savings to be had by using a measured approach to retrofit.

    The goal is to have thermal performance testing in legislation

    Even testing identical properties on a development can throw up variable results and identify pitfalls in the construction process, in much the same way as when air tests were first introduced, showing why it’s so important for testing to be carried out.

    Tom is keen therefore for thermal performance testing to be included in Part L of the Building Regulations, and with the introduction of the Future Homes Standard which has a requirement for photographic evidence of insulation, he suggests that using a measured approach is actually of far greater value and a better way forward.

    Find out more

    Visit the website of Veritherm UK

    Follow Veritherm on Twitter

    Follow Veritherm on Instagram

    Find out more about Veritherm’s thermal performance test

    Transcript

    Building Performance Interactive

    Ben Adam-Smith is taking part in a new series for Passive House Accelerator which aims to share lessons and best practice from low energy projects across the UK and Ireland. Hugh Whiriskey of Partel has devised the hour long format and is hosting alongside Ben and Mike Jacob of KISS House. The Building Performance Interactive is held monthly and everyone is welcome.

    Please connect with me

    Subscribe, rate and review the podcast in iTunes

    Rate and review the podcast on Stitcher

    Like our Facebook page

    Follow us on Twitter