Tag: Listed

  • HPH033 : Are Conservation Techniques Becoming More Energy Efficient? – with Douglas Kent from SPAB

    HPH033 : Are Conservation Techniques Becoming More Energy Efficient? – with Douglas Kent from SPAB

    Douglas Kent from The Society for the Protection of Ancient Buildings explains how to look after period properties and what advances are being made with conservation techniques in order to achieve greater energy efficiency.

    This podcast is about whether by conserving old buildings we can have sustainable and energy-efficient period properties.

    douglas-kent-spab

     

    Interview with Douglas Kent

    Douglas Kent was brought up in Saffron Walden, a village with a deep and rich architectural heritage. Douglas believes this influenced his choice of career and is why he became involved with The Society for the Protection of Ancient Buildings (SPAB) in the year 2000. He is now the Technical and Research Director.

     

    SPAB Aims to Save Old Buildings from Damage, Demolition or Decay

    SPAB was founded in 1877 by the designer William Morris and its objective is to save old buildings from damage, demolition or decay. At the time it was established they were very much trying to prevent buildings being restored and rewound back in time. Douglas explains this with an example of how a church could have been adapted or reconstructed to what medieval masons should have done at the time if they’d built it properly in the first place. So their focus is on conservation and repair rather than restoration.

     

    The Most Common Damage to Old Buildings is Often Unintentional

    While the threat to old buildings in the past was outright demolition today it does not happen very often. Expansion of airports, such as Stansted, would however be something that could have a catastrophic effect on the historic built environment.

    More often the damage occurs unintentionally by the way in which buildings are conserved. People use materials that don’t work sympathetically with older buildings and not just look different but perform differently.

     

    Older Building are More Analogous to an Overcoat Rather Than a Raincoat

    New buildings often rely on a system of cavities, barriers and membranes to exclude moisture and Douglas likens this to a raincoat. With an older building it’s more analogous to an overcoat so it allows some moisture to come into the building but it will evaporate out when the conditions change. Old buildings that work in this way are breathable.

     

    Historic Buildings Are Protected in Many Countries

    Douglas explains that although protection of old buildings exists in many countries, it varies hugely in the way it is implemented. The UK has three bands:

    Grade I – this is the top band and accounts for the smallest percentage of buildings

    Grade II* – these are still important buildings that also account for a small percentage of historic buildings

    Grade II – the vast majority of older buildings fall into this category.

    Finding out more about listed buildings from English Heritage.

    There are also conservation areas, wider zones of protection and things like scheduled monuments.

     

    When Improving Energy Efficiency You Must Avoid Creating a Warm Damp Building

    Most buildings predating 1919 are considered breathable (as mentioned above) and therefore the energy efficiency measures must be appropriate. For example, lime mortar or lime plaster have this breathable quality to them. Using inappropriate materials to improve thermal performance could mean that a cold damp building becomes a warm damp building. This could trigger off things like rot, decay, rusting and mould. It could even aggravate human health ailments such as asthma and so on.

     

    Original Components Often Have a Long Lifespan Left

    As well as affecting the aesthetic qualities of a building, removing original period components can be counterproductive when you consider that they might have a long lifespan left. Douglas gives the example of when people take out single-glazed windows that are built with really good timber and replace them, perhaps, with plastic double-glazed windows where often the seals will go within a couple of years.

    Blower-door-test

     

    Research Where Your Old House is Losing Heat

    Your goal should always be to retain as much as possible of the original fabric of the building and the overall essence of it. That can be achieved by using compatible materials and methods, and carrying out only work that is essential for the long term survival of the building. Also you should underpin that work with good information and a good understanding of the building.

    For example, rather than blitzing the building with new windows, consider where you are losing energy. This could be done by carrying out thermal imaging or an air pressurisation test, which will help you pinpoint where the draughts etc. are occurring. This is a much more targeted approach rather than doing something and hoping for the best.

    thermal-imaging

     

    Secondary Glazing Can be Better Than Double Glazing

    Research by Historic Scotland has shown that you can meet or even exceed the value of new double-glazing by upgrading existing windows using secondary glazing. So establish the full facts rather than rushing to make the changes because often the changes can save little energy and damage the building in the long term.

     

    Providing Decisive Advice for Old Buildings is Difficult

    Douglas says that at SPAB they are always refining their techniques. The difficulty is they are trying to base what they are doing on good information, which involves a number of research projects and that takes time. This has to be about robust scientific evidence.

    U-value-research

     

    Research Shows Actual Performance Often Exceeds Predicted Models

    One discovery they have made is that in 77% of cases the U value, or thermal transmittance, of an old wall is actually better than the calculated value when measured in situ. This is partly because when doing the calculations they don’t know quite what the construction of the wall is and even if they do, there is often very little data that relates to those materials to enter into the software. If the data going in is not reliable then neither will the data coming out.

    Supported by English Heritage and Dartmoor National Park Authority they have measured a range of different constructions and methods including wattle and daub, stone buildings, cob buildings and so on.

     

    Establishing the Limits to Insulation and Airtightness are the Priorities

    General conclusions that the SPAB are beginning to find is that insulating a traditionally built building below a U value of about 0.4 could result in the technical risks (described above) of mould, rot, etcetera. Equally when reducing the number of air changes per hour they are beginning to think that below about 0.4 or 0.5 there could be negative consequences.

    research-on-old-buildings

     

    More Research Must be Carried Out

    Douglas is aware that a lot more research needs to be done as well as refining useful tools, such as the hygrothermal modelling software WUFI . More data could be used to really improve the quality of the information and thus the basis upon which bigger decisions are made. Although there have been some interesting and helpful findings this is still very much the beginning.

     

    Old Buildings are Sustainable in Many Ways

    Old buildings are frequently built of materials with a lower embodied energy than their new counterparts. They also often have a longer lifespan and are easier to repair too.

    Douglas uses windows as an example. Timber windows can be easily repaired by a local carpenter thus extending the lifespan, whereas with modern counterparts there can be propriety systems. This means that if there are problems 20 or 30 years down the line and the supplier is no longer in business, then the windows cannot be fixed.

    Older buildings commonly possess features that are conducive to good energy efficiency, such as really thick thatched roofs, thick walls that are able to retain heat and release it gradually and windows that are disposed to maximise daylight but minimise heat loss. Not only that but as many old buildings are constructed with a lime mortar this makes recycling at the end of the life cycle much easier.

     

    Basic Maintenance Should be the First Step in Improving the Performance of an Old House

    SPAB recommends a step by step approach, which always starts with basic maintenance. All too often people think about microgeneration and putting up wind turbines without stopping their gutter leaking! Correcting a leaking gutter will prevent the wall becoming damp and obviously a damp wall is an energy inefficient wall.

    So undertake the basic maintenance first of all. Every year SPAB run National Maintenance Week to emphasise this point.

     

    Secondly Consider the Quick Wins

    This second step is about the things that have a short payback and cause little disturbance to the historic fabric of the building. For example, things like draught proofing windows and doors, topping up loft insulation and fitting thermostatic radiator valves and so on.

    window-repair

     

    Finally Consider the Major Work

    Only after completing the first two steps should you consider the major work. This might include upgrading the boiler and heating system, introducing a renewable heating source or reinstating a missing lime render externally on your stonework. Spending a little bit of time and money on targeting the measures (as described above) can reap big rewards later on.

     

    A Passivhaus Retrofit is Not Appropriate to a Traditionally Built House

    Douglas advocates that if a building predates about 1919 – in other words it is of traditional construction – then a traditional approach should apply. This includes 1 in 5 of the UK building stock, not just listed buildings.

    Anything post that 1919 period, generally speaking, would have a much freer hand to consider alternative approaches such as Passivhaus and approaches that hermetically seal a building.

    various-period-homes

     

    Older Buildings Must Not Become Seen as Liabilities

    SPAB are not totally against thermally upgrading older buildings because they understand that if they become too expensive to run then they may become liabilities. This could lead to increased demolition which is obviously against their core objective.

    However, Douglas does point out that as of the beginning of 2013 listed buildings no longer require energy performance certificates. Even before they were withdrawn, they were being taken with a pinch of salt because some of the recommendations did not add up. Commenting on retrofitting Douglas says: “We do need to be careful and to make them comfortable and fit for 21st century living.”

     

    Lifestyle is Just as Important When Saving Energy

    Having an energy-efficient building is one thing but if the occupants aren’t sympathetic with the overall aim of saving energy then it defeats the point. It’s often been shown that people who live in some of the more energy-efficient houses are using them perhaps in a more cavalier fashion and with the money that they are saving from being energy efficient they’re going off and flying around the world. Therefore the bigger picture is sometimes more complicated than it may first appear.

     

    Was William Morris in Fact the First Person to Talk About Sustainability?

    Conserving old buildings is about keeping as much as possible of the physical fabric of the old building and that comes back to the principles that were set up by William Morris when he founded the SPAB in 1877. Therefore it could be argued that, albeit unwittingly, perhaps William Morris in encouraging people to save old fabric and not to consume more resources in putting up new buildings was one of the first people to talk about sustainability.

     

    Find Out More about the SPAB

    SPAB

     

    Transcript

    Download a transcript of the interview with Douglas Kent.

     

    Grand Designs Live

    Ben attended Grand Designs Live and amongst his highlights from this year’s event was seeing the Cube Project. Dr Mike Page from the University of Hertfordshire designed a modern and practical micro-home (3m x 4m x 3m) in which a single person or couple could live a comfortable, low impact life. It illustrates, amongst other things, how we actually need much less space than we imagine.

    There was also a session on retrofitting which included Paul King Chief Executive of the UK Green Building Council and Grand Designs presenter Kevin McCloud on the panel. Kevin’s recommended resources for retrofitting period properties were Old House Eco Handbook and Warmer Bath. Radical retrofits were not mentioned in the discussions.

    However a few days before, in an article for the Telegraph, Sarah Lonsdale wrote about how period properties could become a luxury of the super-rich. By 2030 the predicted minimum income of a family wishing to live in a period house and avoid fuel poverty would be around £100,000 ($160,000).

     

    Our Question for the Comments Section

    Does conservation offer the best solution when making old houses energy efficient?

     

    Please Connect With Me

  • HPH008 : Retrofitting a Victorian House to Passivhaus Standard #1 – with Tom Pakenham from Green Tomato Energy

    Tom Pakenham from Green Tomato Energy describes the practical challenges of making a Victorian house energy efficient. Plus how passive house principles helped a Norwegian explorer in the 1890s.

    Tom Pakenham

     

    Interview with Tom Pakenham

    Tom explains that he wanted to do something about the way we treat the planet and he believed that the best way to do that was by setting up businesses in the environmental sector. It started with Green Tomato Cars, a minicab company which runs on low emission principles. Then the Green Tomato Kit was launched, a green starter kit for the home. The third business in the group is Green Tomato Energy which exists to help people reduce their environmental impact through their homes. They also offer a consultancy service for low energy building.

     

    New Build Not an Option in London

    Tom lives in West London where there are virtually no opportunities for new build and, as he had no intention of moving away from family and friends in the area, it was logical to renovate a property. Most of the building stock is from the late 19th century and early 20th century, and Tom wanted to create a low energy home that was also sympathetic to the cultural heritage and was a beautiful building. A lot of people tend to think of eco homes as looking like bomb shelters or nuclear bunkers. This project set out to dispel that myth.

     

    The Passivhaus Standard is Flexible in Terms of its Application

    Over a year and a half Tom was introduced to Passivhaus. The better acquainted he became with the options, the more attractive the Passivhaus standard became. He particularly liked the fact that it was not a prescriptive way of building and that the principles could be applied to the geometry of the existing structure in order to work out a way of making it perform to the low energy standard.

     

    Attention to Detail is Important

    After selecting your architect and energy engineer, Tom advises to spend time with your design team to make sure what they’re designing will work within your budget and within how you want to live in the property. Don’t rush this planning stage because this is where a lot of time can be saved further down the line. When assembling your team, look for a builder who is not only technically competent but understands what is trying to be achieved and why. This must also filter down to all other workers. If you fail on the detail, then the whole project can come into jeopardy.

     

    Be Prepared to Learn Along The Way

    No matter how much planning is done upfront, when a period property is stripped back there may be some surprises. Tom thinks that as long as you approach the project with an open mind and the understanding that something might change and you might need to learn things as you go along, then you’ll be fine.

     

    The Risk of the Project is More Psychological Than Real

    When Ben expresses a concern about the potential for ruining an old building by carrying out this type of extensive work, Tom reminds him that there is a risk but this is not like jumping down a well! If the project has been designed well and the work has been carried out properly, then it’s not an issue. Its structural behaviour and its energy behaviour is something that can be worked out and designed. Changing insulation or cutting off thermal bridges will have an impact on the joists or brickwork, etcetera, but it can be predicted.

     

    Triple Glazed Sash Windows

    Tom explains some of the challenges around finding windows. In the end he had to have his windows specially made. The top frame is fixed and the bottom pane opens on a tilt or turn mechanism, so you can open it like a door or tilt it inwards. So they’re not actually sash windows. Triple glazed sliding sashes look unlikely to be become popular due to their cost. The issues include the increased weights necessary to balance the extra weight and also how you create a proper airtight seal.

    The big advantage of triple glazing in the city is it acts as a great sound insulator.

     

    Payback in 35 Years

    Although this project was one of the first of its kind, there would still be a straight-line payback in 35 years.  That assumes no capital uplift in the cost of the house. Also as energy prices rise that payback gets shorter and shorter.

    However, Tom doesn’t believe it is helpful to look at it in these terms. He emphasises the comfort and improved air quality of the building: you are creating a great place to live. He gives another example of when you are installing something like a kitchen, you rarely look at the payback and that you really want the great environment it will give you.

     

    Tom’s Top 3 Tips for Renovating a House with Energy Efficiency in Mind

    1. Spend more time planning than you think you need. The work is much easier with a proper plan.
    2. Make sure you have a good team that understand the objectives and buy into the project.
    3. Have enough money to finish. The last thing you want is to be caught halfway through and unable to finish in a completely gutted house.

     

    Watch a Video About This Project (Lena Gardens)

    Tom Pakenham and his design team explain the work that was carried out to this Victorian terraced property.

     

    Transcript

    Download a transcript of the interview with Tom Pakenham.

     

    Energy Efficiency in the 19th Century

    In the last session Ben Adam-Smith mentioned the eco houses from the Home World exhibition in 1981 and he thought that was incredible. However, after attending a talk by Mischa Hewitt from Earthwise Construction at the Retro Expo, Ben is now aware of an eco ship over a century ago.

    ‘The Fram’ of Fridtjof Nansen was a ship built for polar exploration and had many pioneering designs, including in the cabin:

    • Highly insulated cork and felt
    • A triple glazed skylight
    • An airtight layer of linoleum
    • Good ventilation

    According to the 1897 publication ‘Farthest North’ the ship had a stove in the cabin but it was never lit because the temperature was warm and comfortable already. In fact they even thought of getting the stove removed!

     

    Motivating Email

    Ben reads out an email from a listener, Dr James Shorrock, who is about to renovate his own house. He talks about ‘researching the usual heat pump options’ but after listening to the podcast ‘thinks maximising the building fabric/insulation has got to be the best starting point’. Dr Shorrock has also requested a future episode on SIP panels.

     

    The Construction Industry Podcast

    If you like podcasts and you work in construction, Ben recommends checking out The Construction Industry Podcast with Cesar Abeid. There’s relaxed chat with construction professionals, plus Cesar shares some great marketing strategies for your business.

     

    Ask Your Questions or Share Your Feedback

     

    Please Connect With Me