Tag: energy assessment

  • HPH067 : How a Home Energy Assessment Can Inform Retrofit Measures – with Graham Hunter from Parity Projects

    HPH067 : How a Home Energy Assessment Can Inform Retrofit Measures – with Graham Hunter from Parity Projects

    Graham Hunter from Parity Projects explains how data collected from one of their energy assessments is then turned into a report of options for the homeowner. This follows on from episode 60 which trailed Graham as he conducted an assessment.

    graham-hunter

     

    Interview with Graham Hunter

    Graham Hunter is an energy analyst who helps deliver the Home Energy Masterplan service for Parity Projects.

     

    The Report Contains Options Rather Than Recommendations

    Backed up by the data that’s been collected, the report from Parity Projects details all the options and the numbers behind them.

    When looking at this house’s heating source, for example, the choices range from replacing the existing boiler and adding in control mechanisms to installing an air source heat pump or biomass boiler and so on.

    So the report tries not to make recommendations but instead provides the homeowner with all the necessary information to make an informed decision.

     

    Measures are Grouped into Packages to Show Their Cumulative Impact

    There are often 60-70 possible improvements. Based on the priorities of the homeowner, these will then be ranked in terms of level of importance and duration of payback.

    Measures are also put into packages in order to show their cumulative impact.

    Graham says: “Adding up the individual savings of all the measures is quite a different thing to applying those measures on top of each other.”

    energy-assessment-quick-payback

     

    In Most Situations Homeowners Make Choices Based on Costs

    The cost of the measures and their payback periods are most commonly how homeowners inform their decisions, but the report can be environmentally driven.

    In this case, for example, replacing the oil boiler with a new one would be the best option financially. However, as Ben’s Dad expressed an environmental motivation, Parity Projects have detailed other heating sources that would reduce CO2 emissions.

    CO2-emissions-of-house

    Space heating contributes the most CO2 emissions in this property 

     

    Most Houses Have Some Potential ‘Quick Wins’

    Graham outlines the first package of non invasive ‘No Brainers’ that payback in a very short space of time.

    For this assessment that included blocking the chimney with a chimney sheep, installing low flow shower heads and replacing halogen spotlights with LED lights.

     

    Significant Retrofits Take a Long Time to Payback

    As Ben’s Dad does not envisage himself being in the house for longer than 10 to 15 years, a whole house retrofit would not be a viable option in terms of payback.

    Energy prices, of course, could increase drastically thus reducing that payback period but there is no way of knowing this.

     

    whole-house-retrofit-costs

     

    Find Out More

    Parity-Projects-logo

     

     

     

     

    Follow Parity Projects on Twitter

    Transcript

    Download a transcript of the interview with Graham Hunter.

     

    Please Connect With Me

  • HPH060 : What to Expect from a Detailed Energy Assessment – with Graham Hunter from Parity Projects

    HPH060 : What to Expect from a Detailed Energy Assessment – with Graham Hunter from Parity Projects

    Graham Hunter from Parity Projects conducts an energy assessment of a country house. He talks through the process as he goes about it and explains how the collected data will be used.

     

    An Energy Assessment from Parity Projects

    It’s a slightly different podcast this week because there’s no guest as such. Instead we follow Graham Hunter from Parity Projects as he conducts an energy assessment of Ben’s family home. Plus Ben’s Dad is a special guest in this episode, too!

     

    A Short History of the Family Home

    The house was originally a farm worker’s cottage (two up, two down). When it was bought in 1966 someone had already added a third bedroom at the back.

    home-as-cottage

     

    As the family expanded, in 1976 the house was extended within the existing curtilage, adding a couple of bedrooms upstairs and changing the downstairs layout considerably.

    Although this was around the time of the 1970s energy crisis there was little information on how to make homes energy efficient (beyond adding a bit of insulation).

    home-early-90s

     

    In 1996 the house was finally extended to the south, creating a new kitchen as well as a master bedroom.

    The new walls had good amounts of insulation, but airtightness was not even a consideration.

    A whole house ventilation system was added at this point, but more for comfort and sound-proofing than energy efficiency.

    home-final-extension

    A PV array was also installed in 2003.

     

    Parity Projects’ Energy Assessment is an In-depth Analysis

    The first thing to understand about energy assessments is that they are all different. Sarah Lonsdale recommended Parity Projects because she had first hand experience and she could see they collected a lot of data to try and create an accurate picture of what’s going on.

    Graham explains that they can model things like hot water use, depending on how many baths and showers you might be taking each week, etc.

     

    Using Energy Bills Helps Increase the Accuracy of the Modelling

    Before they recommend any measures (such as upgrading the heating system or adding insulation, etc.) they calibrate the best case scenario of how the house is using energy against the utility bills. This means that the savings they are modelling are realistic.

    screen shot 1

    An example of the data that is collected

     

    1. The Client Discussion

    Initially there is a question and answer session with the client of between 10 – 15 minutes. This helps gather information about the house and how it’s run.

    client-discussion

     

    2. The Walkaround

    This is an opportunity for the client to point out any issues, such as draught points or areas that suffer from condensation, etc.

     

    3. Data Collection

    This is the bulk of the work and involves lots of measurements!

    Graham started by making a sketch of the elevations from the outside and then he drew a floor plan of the inside.

    With his laser measure he recorded wall dimensions, ceiling heights as well as the types of windows and their sizes etc.

    He also checked out the loft, took a look at the boiler and took notes on light fittings and other appliances.

    laser-measurements

    A laser measure saves time when getting dimensions

    4. The Modelling

    The next step is the modelling which is done back in Parity Projects’ offices! We will cover this in a future podcast.

    After 10 working days the client will receive a hard copy of the report and have the opportunity to chat through the findings during a 30-minute phone consultation.

     

    Payback Periods Tend to Lead Most People’s Decisions

    In the report that the clients get there are various options that are presented from the ‘no brainers’ that will pay back within five years to other measures that may be take longer but be worth considering.

    While reports can be based on CO2 savings, for most people cost is the driver.

     

    This is About the Efficiency of the House AND How it is Used

    Graham says: “We constantly find that the same house used by different people will act very differently.”

    That’s why this is all about the detail. Being thorough is very important.

     

    Find Out More

    Parity-Projects-logo

     

     

     

    Follow Parity Projects on Twitter

     

    Transcript

    Download the transcript of the interview with Graham Hunter.

     

    2014 UK Passivhaus Awards – the Winners

    Each year the Passivhaus Trust hosts the UK Passivhaus Awards, which aims to promote the Passivhaus standard in the UK.

     

    Architectural Design Category

    Winner: Burnham Overy Staithe – Parsons + Whittley

    [Chris Parsons was also a guest on one of our recent podcasts.]

    Bespoke Project Design Category

    Winner: New Farmhouse – Kirsty Maguire Architects

    Cost and Build-ability Category

    Winner: Coventry Eco House – Beattie Passive, Encraft and FORCE

    All videos were produced by Regen Media, which specialises in helping green builders promote themselves using content marketing.

    Check out the complete shortlist of projects that entered the UK Passivhaus Awards 2014.

     

    Please Connect With Me